| AMI BLFL4-12NP Flange Block Bearings | T min.:-20 °C; A:70 mm; S:25.4 mm; d:57.15 mm; L:241 mm; Designation of bearing:UC212-36G2T20; G:M6x1; Recommended tightening torque for set screw:16.8 Nm; H:69.8 mm; Weight:5.07 kg; |
| AMI MUCST208-24 Mounted Units & Inserts | da min:50 mm; rs min:1 mm; f0:15.3; Static load, C0:15.1 kN; d:45 mm; da max:52.5 mm; Mass:0.24 kg; Brand:NTN; Characteristic cage frequency, FTF:0.43 Hz; Max operating temperature, Tmax:110 °C; |
| AMI UK328 Mounted Units & Inserts | L3:200 mm; T min.:-40 °C; SW:7.94 mm; A2:75 mm; s1:54 mm; Weight:30.4 kg; L2:34 mm; Recommended tightening torque for set screw:54.5 Nm; d:101.6 mm; A5:66 mm; |
| AMI UEFCS211-32 Flange Block Bearings | S:18.8 mm; Dz:80 mm; G:R1/8"; H:155 mm; Z:58.9 mm; s1:36.3 mm; d1:51.1 mm; d:35 mm; Recommended tightening torque for set screw:11.5 Nm; Weight:1.27 kg; |
| AMI UCFB210-30TCMZ2 Flange Block Bearings | H2:200 mm; C0:71.5 kN; G:M10x1; A1:55 mm; N:27mm; C:96 kN; L1:100 mm; H1:34 mm; S:24.5 mm; d1:120 mm; |
| AMI UCST205-16TCMZ2 Take Up Unit Bearings | Y0:0.79; D:125.41 mm; Fatigue limit load, Cu:19.6 kN; d1:105 mm; Nlim (grease):2,700 rpm; a:26 mm; ra max:0.8 mm; Characteristic inner ring frequency, BPFI:14.65 Hz; Min operating temperature, Tmin:-40 °C; Y2:1.44; |
| AMI UCFB207-22FS Flange Block Bearings | A1:11 mm; A:30 mm; A2:38.7 mm; T max.:100 °C; Weight:0.85 kg; Designation of closed end cover:SCC205; C0:7.88 kN; S:14.3 mm; G:R1/8"; Dz:60 mm; |
| AMI MUCFT205-16NP Flange Block Bearings | J:95 mm; A1:22 mm; T min.:-20 °C; G:M6x1; H2:101 mm; C0:6.65 kN; N:13mm; Designation of housing:PH204-; T max.:100 °C; Designation of bearing:UC201-08G2L3; |
| AMI UETFT207-20 Mounted Units & Inserts | S:24.6 mm; G:M6x1; Designation of bearing:EX310-31G2T04; A2:70 mm; d:49.21 mm; N:23mm; Recommended tightening torque for set screw:16.8 Nm; A1:20 mm; B:49.2 mm; T min.:-40 °C; |
| AMI BFPL7-20MZ2CB Flange Block Bearings | Z:37 mm; C0:6.65 kN; N:12mm; s1:15.5 mm; Dz:54 mm; Recommended tightening torque for set screw:3.7 Nm; C:12.8 kN; T min.:-20 °C; T max.:200 °C; A4:20.5 mm; |
| AMI UEFL207TC Mounted Units & Inserts | Nref:3,800 rpm; D1:128.7 mm; D:150 mm; d2:86 mm; Fatigue limit load, Cu:37.8 kN; Y0:1.96; Nlim:4,500 rpm; Characteristic cage frequency, FTF:0.4 Hz; Mass:4.27 kg; Static load, C0:396 kN; |
| AMI UGAO310-31 Pillow Block Bearings | d:55 mm; ra max:1 mm; Db max:74.5 mm; Axial displacement K Factor:1.05; d2:61.15 mm; D1:73.71 mm; Precision class:P4S; Dynamic load, C:10 kN; D2:75.31 mm; Radial rigidity:356 N/µm; |